MC74HCT541A - Octal 3-State Non-Inverting Buffer/Line Driver/ Line Receiver

onsemi

Key Features

inputs and outputs on opposite sides of the package and two ANDed active.
low output enables. Features.
Output Drive Capability: 15 LSTTL Loads.
TTL/NMOS.
Compatible Input Levels.
Outputs Directly Interface to CMOS, NMOS and TTL.
Operating Voltage Range: 4.5 to 5.5 V.
Low Input Current: 1 mA.
In Compliance With the JEDEC Standard No. 7 A Requirements.
Chip Complexity: 134 FETs or 33.5 Equivalent Gates.
NLV Pref.

MC74HCT541A octal 3-state non-inverting buffer/line driver/ line receiver by onsemi - Datasheet Preview

Datasheet Details

Part number	MC74HCT541A
Manufacturer	onsemi
File Size	219.66 KB
Description	Octal 3-State Non-Inverting Buffer/Line Driver/ Line Receiver
Datasheet	MC74HCT541A Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC74HCT541A	Octal 3-State Non-Inverting Buffer/Line Driver/Line Receiver	Motorola
MC74HCT573A	Octal 3-State Noninverting Transparent	Motorola
MC74HCT574A	Octal 3-State Noninverting D Flip-Flop	Motorola
MC74HCT00A	Quad 2-Input NAND Gate	Motorola
MC74HCT04A	Hex Inverter	Motorola

Other Datasheets by onsemi

Part Number	Description
MC74HCT573A	Octal 3-State Noninverting Transparent
MC74HCT574A	Octal 3-State Noninverting D Flip-Flop
MC74HCT595A	8-Bit Serial-Input/Serial or Parallel-Output Shift Register
MC74HCT04A	Hex Inverter
MC74HCT08A	Quad 2-Input AND Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MC74HCT541A Octal 3-State Non-Inverting Buffer/Line Driver/ Line Receiver With LSTTL-Compatible Inputs High−Performance Silicon−Gate CMOS The MC74HCT541A is identical in pinout to the LS541. This device may be used as a level converter for interfacing TTL or NMOS outputs to high speed CMOS inputs. The HCT541A is an octal non−inverting buffer/line driver/line receiver designed to be used with 3−state memory address drivers, clock drivers, and other bus−oriented systems. This device features inputs and outputs on opposite sides of the package and two ANDed active−low output enables. Features • Output Drive Capability: 15 LSTTL Loads • TTL/NMOS−Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS and TTL • Operating Voltage Range: 4.5 to 5.